-
What To Prepare Before Operating The Tablet Press
Sep 02 , 2022
After the mold of the tablet press is installed, turn the steering wheel by hand to make the steering wheel turn 2-3 times, and observe the abnormal friction noise of the upper and lower impact rods on each track and each hole. Turn on the main power switch, the power indicator light is on, and the speed is 0. Press the vacuum cleaner start button, the vacuum cleaner running indicator lights up. N...
Read More
-
Introduction To The Die Of Tablet Press
Sep 28 , 2022
The die is the main component of the tablet press. The common faults in use are: the punch is worn and replaced with a new one, mainly because the pressure is too large, and the punch bend affects the weight difference of the tablet and must be replaced. The feeder is worn or installed incorrectly, and the turntable at the bottom of the feeder is close to the three-dimensional wear. The pressure o...
Read More
-
Problems And Solutions Of Tablet Presses
Oct 13 , 2022
1. The tableting machine may experience delayed disintegration during the tableting process, which means that the disintegration time exceeds the Pharmacopoeia regulations. Reasons for delayed disintegration: insufficient amount of disintegrant, large adhesive viscosity, large amount of hydrophobic lubricant, high pressure, and high tablet hardness. Solution: choose a good disintegrant, or increas...
Read More
-
How Did The Tablet Press Innovate And Develop?
Oct 13 , 2022
The industry of tablet presses for the production of tablets in the pharmaceutical industry must also innovate and develop. Tablet press is a kind of automatic continuous production equipment, which is used to suppress objects with small diameters, circular plates and profiles with text, symbols and graphics. The tablet press is the main equipment that affects the pass rate of most quality and eco...
Read More
-
What Is The Rotating Structure Of The Tablet Press
Oct 20 , 2022
Rotary tablet presses can be used as presses for brushes, carbon sheets and contacts. The power part is mainly composed of the transmission part and the working part. The working part consists of a table that rotates around an axis. The table is divided into three levels. The upper part of the platform is provided with an upper handle, the middle part is provided with a lower handle, and the lower...
Read More
-
How To Adjust The Tablet Weight Of The Tablet Press
Oct 20 , 2022
During the punching process of the rotary tablet press, the weight difference of the tablets tends to increase. What should I do? (1) The length of the die of the rotary tablet press is uneven: the workpiece weight difference may increase, so a caliper should be used to check whether each punch is qualified. If individual reductions may be due to a failed expulsion motion and low particle fill, th...
Read More
-
Problems Prone To Occur In The Work Of Capsule Filling Machine
Nov 29 , 2022
There may be differences in the loading capacity during the operation of the capsule filling machine. The main reasons are capsule factors, drug factors, filling equipment factors and so on. If filling is required, the fluidity of the drug can be improved by adding appropriate excipients or granule preparation methods, and the filling equipment must be repaired and maintained in time to ensure its...
Read More
-
What Is The Forming Process Of The Blister Packaging Machine
Dec 06 , 2022
Blister packaging machine molding is a kind of plastic processing. Its main principle is to heat and soften the plastic film, vacuum attach it to the surface of the mold, and cool it to shape. It is widely used in plastic packaging, lighting, medicine and other industries. The hard transparent plastic sheet is transformed into a specific concave shape of transparent plastic through the blow moldin...
Read More
-
Factors Affecting the Filling Accuracy of Capsule Filling Machine
Dec 06 , 2022
At present, most domestic capsule filling machines are standard models for quantitative filling. The filling volume is determined by the thickness of the measuring plate and is related to the free density of the filling material. At the same time, the accuracy of the filling volume control is related to the filling structure and the influencing factors of the filling material itself. The hygroscop...
Read More