Cleaning Process Of Counting Machine
Jun 18, 2022
The power supply of automatic counting machine must be cut off when maintaining the equipment, clearing the field, and cleaning the equipment.If cleaning the medicine bucket and vibration plate and other components, do not splash the cleaning liquid on the electrical components.
1.Disassembling machine of counting machine
Remove the plexiglass above the hopper and trough
Remove the hopper
Remove the vibration groove in order from high to low, from back to front
Remove the hopper
Remove the test parts
Remove the door mechanism components
Remove the lower hopper front cover panel
2.Cleaning method
Soak et cloth with drinking water and pure water, wring and wipe the equipment appearance, feed hopper, trough, plexiglas, front cover plate, dry naturally.
Spray with alcohol on the dry cloth in order, wipe the hopper, vibration trough, testing parts, mechanism parts, material door mechanism, feeding mouth again, and dry naturally.
Photoelectric head medication cotton or soft material to wipe the two glass surface of the photoelectric head to remove the dirt.
After these equipment and parts are dried naturally, the equipment is installed back in place one by one according to the principle of dismantling first and then installing.
Start the conveyor, wipe the conveyor chain plate with the wring cloth successively, make it dry naturally.
3.Cleaning cycle
Cleaning must be done after the end of the daily work.
The equipment must be cleaned when changing the variety or batch number.
Cleaning is valid for 3 days.
4.Cleaning effect
Visual inspection of the surface without a foreign body.
Cleaning materials and tools of counting capsule tablet machine: drinking water, 70% alcohol, rags, brushes, water containers, etc.
IPv6 network supported 
Home
Products