Filling of Blister Packaging Machine

The elastic yellow hoses of blister packaging machines are mostly dense-grained hoses wound with stainless steel filaments. The aluminum blister packaging of ten-make capsules is commonly used. The inner diameter of the tube is slightly larger than the outer diameter of the capsule, which can ensure that only a single row is stored in the tube. capsule. Care should be taken to ensure that the hose does not have a dead bend to ensure the smooth flow of the cavity in the tube. Usually, with the help of the vibration of the whole machine, the hose shakes by itself, so that the total cavity of the cavity can be stored at the lower exit.

The inspection of the cover packaging machine utilizes manual or photoelectric detection meter to be placed behind the feeder to check the filling situation of the medicine in time, and it can manually patch or pick up the excess pellets when necessary. The more common use is the use of a rotating soft brush, which is accompanied by a slow push sweep during the advancement of the plastic film. Since the soft brush works closely against the plastic film, the excess pellets always rush to and fro the direction of the filled bubble, and because of the push button of the soft brush, the vacant bubble will also be filled with medicine pellets.

In the printed aluminum-plastic packaging, the name of the drug, manufacturer, method of administration, etc., which should be reminded to the patient, must be printed on the aluminum foil. When the rolled aluminum foil is introduced into the blister packaging machine, the above-mentioned printing work will be carried out before pressing with the plastic film. The mechanism for printing on aluminum foil on the machine also requires a series of mechanisms such as ink distribution wheels, steel wheels, and printing plates.