Blog

The Basic Operation Of Starting The Blister Machine

Dec 08, 2021

The first is the first installation of the packaging material PVC rigid film and aluminum foil roll of blister packing machine: remove the compression nut and stop sleeve on the film reel, put the PVC rigid film or aluminum foil roll on the adjusting sleeve, install the stop sleeve and press tightly Screw the nut and tighten the nut so that the film cannot be loosened or rotated on the adjusting sleeve.

blister machine high speed

Then put the PVC plastic tape through the upper and lower heating plate molds of blister packaging machine to the indexing feed roll and press on the pressure roller. After the temperature and pressure reach the requirements, press the start button to work; use a steel ruler to measure, when the foam tape is formed The length is the same as the circumference of the feed roller or minus 1mm, and the next step is to prepare.

The foam tape formed by the positive pressure of the flat plate is passed around the guide roller to the filling platform, and the blister is pressed into the socket of the heat-sealing roller. Turn the seal clutch knob to ON and press the start button to work. When the heat-sealed aluminum-plastic foam tape is pulled out by 1.5 meters, press the stop button to stop.

Put the heat-sealed aluminum-plastic blister into the blister of the indexing feed roller according to the group pitch, pay attention to leaving enough allowance for the floating roller of blister packaging machine to swing up and down when pulling the bubble tape; manually rotate the pulley, when the indexing feed After the roller stops rotating, observe whether the plate is in the concave mold. The front and rear edges should have proper positions. If not, repeat the above process.

Rich Packing Pharmaceutical & Packing Machinery Provide Door-To-Door Overseas Service, All Products In Stock, Guaranteed For 3 Years! Free Maintenance For Life time!

Contact & Advisory
Email : manager@richpacking.cn
WeChat & Whatsapp & Line
+8613826093596
Address
Building D, No. 226, Beishan Qiaotou Street, Haizhu District, Guangzhou City,Guangdong Province,China

Follow Us

Hot Tags

Leave A Message

Social icons :

IPv6 network supported

Friendly Links :

RuidaPacking Capsule Filling Machine Manufacturers

The Basic Operation Of Starting The Blister Machine

Material Device Of Blister Packaging Machine

Structural Principle Of Blister Packaging Machine