-
How To Adjust The Cam Of Blister Packing Machine?
Aug 04 , 2022
What is the installation sequence of the valve cam of the blister packaging machine on the shaft? First, from the inside to the outside, it is the traction and clamping cylinder cam, the back-stop cylinder cam, the forming blowing cam and the forming cylinder cam. When the return position of the heat sealing cam linkage heat sealing mold is very low, the valve cam is installed according to the pos...
Read More
-
How To Use The Vacuum Pump Of The Blister Packaging Machine Correctly?
Aug 04 , 2022
What are the steps to correctly use the vacuum pump of the blister packaging machine? Start: After the oil level is determined, the vacuum pump can be started. Before starting the vacuum pump, the rotation direction must be checked after one start and every change of wiring. Operation: Before the blister packaging machine works normally, the valve of the intake pipe should be closed, and the pump ...
Read More
-
How Has the Technology Of Chinese tablet press Advanced?
Aug 04 , 2022
China's novel tablet presses and tableting technologies emerge one after another under the increasingly updated technical support. 1. The rotary tablet press focuses on increasing the pre-pressure and improving the tableting quality is a common consideration for many tablet press manufacturers when launching new products. At the same time, the main pressure is the same as the pre-compression, whic...
Read More
-
Application Of Omron In Blister Packaging Machine
Aug 15 , 2022
The difficulty of the blister packaging machine lies in the servo control for forming and blanking, which is mainly reflected in the synchronous traction and control voltage of the two engines, and the other two servo controls should also achieve synchronous motion control time as follows: In this case Omron uses two rotary encoders to detect the light of the rotation angle and eliminate the tract...
Read More
-
What Are The Characteristics Of The Materials For Packaging Medicines In Blister Packaging Machines?
Sep 05 , 2022
Our company's blister packaging machine can be used for packaging of various materials, among which PTP plastic cardboard is the most commonly used PVC cardboard. Although PVC has many advantages, such as good quality and low price, it is not very good in terms of moisture resistance, mildew resistance, water vapor resistance, and oxidation resistance. In addition, the production or use of PVC has...
Read More
-
Development Of Progressive Blister Packaging For Blister Packaging Machines
Sep 05 , 2022
In addition to various bottle packaging, blister packaging can be considered as the most commonly used packaging for pharmaceutical packaging. Blister packs have many advantages and can provide patients with a single-dose package of medication that is convenient and economical. In addition, the aluminum-plastic blister packaging protects the performance of the medicine, with fast production speed,...
Read More
-
Blister Packaging Process Guide
Sep 14 , 2022
When you are sick and take medicine in daily life, have you ever carefully observed the package of tablets/capsules in your hand? That layer of protection of the outer packaging of drugs is the use of aluminum blister machine for packaging. This article will take you in-depth understanding of this indispensable packaging equipment in the pharmaceutical industry. The blister packaging machin...
Read More
-
How To Clean The Blister Packaging Machine
Sep 14 , 2022
How to clean the blister packaging machine When the blister packaging machine is out of use, first remove the used waste PVC reels and aluminum foil reels according to the installation procedure, and collect them into waste buckets. Unscrew the nut on the indentation plate, remove the indentation cover and place it on the console, unscrew the module fixing nut, wipe it with alcohol, and then screw...
Read More
-
What Is A Flat Blister Packaging Machine
Sep 28 , 2022
What is a flat blister packaging machine The process flow and task plan of the flat blister packaging machine: form a plastic plate preheater to heat and harden to a plastic shape, the step of the servo traction device is sent to the flat forming station, and the compressed air is used to harden the plastic sheet for blow molding or pressure blowing Molded into a blister, the feeder is filled with...
Read More
IPv6 network supported 
Home
Products