-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
-
Maintenance Items Of Vacuum Pump For Blister Packing Machine
Nov 26 , 2021
Before the blister packaging machine working, the inlet pipe valves should be closed at first, so that the vacuum pump can run for over 15 minutes under the ultimate pressure state. This way can effectively extract the water pump in the gas. The motors should not be stopped and started frequently (the times is less than 6 time in one hour). (Notice: When the vacuum pumps are running normally, the ...
Read More
-
The Solution To The Powder Leakage Of The Tablet Press
Nov 26 , 2021
The maintenance method of the rotary tablet press machine is specifically: the tablet press machine manufacturer needs to check the machine itself and parts regularly, basically check the turbine, bearing, compressor, crankshaft, upper and lower rail guides, etc., and solve the problem in time to avoid affecting the machine. In normal operation, after each use, you need to clean the remaining powd...
Read More
-
Material Device Of Blister Packaging Machine
Dec 08 , 2021
Flat-plate aluminum-plastic blister packaging machine aluminum-plastic reel: sentence includes two parts: aluminum foil reel and plastic film reel. The reel is mainly composed of a cylinder, an inner and an outer stator, a brake ring, and an adjusting nut. The two ends of the cylinder are supported on a supporting shaft with rolling bearings, which are the rotating parts of the reel. When the plas...
Read More
-
The Composition Of The Blister Packaging Machine Depends On These Four Parts
Dec 22 , 2021
The blister packaging machine is a machine that forms a blister with a transparent plastic film or sheet, and seals the product between the blister and the bottom plate by means of heat sealing, bonding, etc. The composition of the blister packaging machine: The blister packaging equipment for medicines is basically similar to the blister packaging equipment for other products, and mainly consists...
Read More
-
Operation Rules Of Aluminum Plastic Blister Packaging Machine
Dec 28 , 2021
I. Pre-working conditions of the aluminum-plastic bubble cover machine: the last production clearance qualified, indoor temperature and humidity qualified. Personnel hygienic dress qualified. The machine is in good condition. Ii. Preparation before packaging: prepare hard sheets, aluminum foil and raw materials (such as powder and particles) suitable for the packaging capsule before packaging. The...
Read More
-
How To Improve The Performance Of Cartoning Machine
Dec 28 , 2021
The cartoning machine automatic high speed is a machine with very good performance and quality. Irregular usage, failure to maintain in time, etc. are all reasons why the cartoning machine cannot work normally. To be able to operate the cartoning box pack machine steadily for a long time, it is necessary to strengthen its maintenance. When using this kinds of cartoning machine ZH-450, the work eff...
Read More
-
Heat Sealing Precautions For Blister Packing Machine
Feb 14 , 2022
Heat sealing is a crucial step in the operation process of blister packing machine. The quality of heat sealing directly determines the sealing of the package, which in turn affects the integrity and safety of the product. If not operated properly, the product may leak and break during transportation and storage, and even affect the service life of the product. To ensure the sealing effect, you ne...
Read More
-
Connection Technology Of Tablet Press
Feb 16 , 2022
A tablet press can be connected to a production line, both German and British tablet presses have this function. It has start, end and speed adjustment functions. Using this option function, it can be reliably and automatically connected with other equipment in the production line, such as sieving, vacuuming, testing, conveying, barreling, etc., to complete the tablet pressing production task sync...
Read More
IPv6 network supported 
Home
Products