How To Adjust The Use Process Of Blister Packaging Machine
Nov 29, 2022
How to adjust if there is a problem in the use of the blister packaging machine: First, adjust the forming box, and adjust the synchronization of forming, heat sealing, and punching steps. Loosen the lock nut at the bottom of the box, turn the hand wheel to move the box horizontally, adjust the box to the desired position, and tighten the nut. Adjust the molding lower mold so that it is aligned with the guide rail, keeping it level so that the PVC is pulled through the guide rail.
Adjust the forming upper mold of the blister packaging machine, adjust the position of PVC, adjust the alignment of the upper and lower molds, loosen the nuts to completely separate the circular surface and the upper plate, tighten the four nuts respectively, so that the upper and lower molds are completely matched, and then rotate the nuts to form Below the fixed plate.
To adjust the lower heat-seal box of the blister packaging machine, loosen the lock nut on the base, turn the hand wheel to make the lower heat-seal box move horizontally according to the instructions of the staff, adjust the heat-seal position, and adjust the lock nut after adjustment. Loosen the die screw and adjust the die to ensure that the mold blister is placed evenly on the die. Tighten the compression screw after adjustment.
IPv6 network supported 
Home
Products