How To Maintain The Components Of The Blister Packaging Machine
Jul 29, 2022
How to maintain the components of the blister packaging machine
The forming die roll, forming template, film pulling roll, sealing template, sealing roll, feeding roll, etc. of the blister packaging machine are important components of the blister packaging machine, and special attention must be paid to cleaning and maintenance during storage and use. Contact with acid, alkali or other corrosive substances. Do not bump or scratch the surface. When replacing, pay attention to cleaning the working surface, and apply a small amount of lubricating oil to prevent dry friction. When working normally, oil should be injected frequently.
After all the molds of the blister packaging machine are adjusted normally, the empty car must be run first, and the blister can be produced when the blister is normal. After each work, you must pay attention to cut off the power in time.
The rotating parts of the transmission system of the blister packaging machine should be regularly filled with lubricating grease, and the air control system, water cooling system, vacuum system and electric control system should be in good working condition to keep the water and gas paths unblocked.
When the blister packaging machine is not used for a long time, the water stored in the cavity of the molding, heat sealing and other related parts should be drained in time, and the inner and outer surfaces should be wiped clean with a machine cloth to prevent rust damage.
IPv6 network supported 
Home
Products