What To Do After The Capsule Filling Machine Has Done Its Job
Aug 15, 2022
After the capsule filling machine fills the capsules, the capsules need to be polished in some cases. How to use the capsule polishing machine: one of the straws of the special industrial vacuum cleaner is placed under the polishing closed cylinder; another special industrial vacuum cleaner The vacuum cleaner suction tube is attached to the top of the waste disposal unit. Connect industrial vacuum and mechanical polishing light sources to adjust the speed of the polishing machine. Adjusts the amount of exhaust air treated on the panel at the inlet of the industrial vacuum cleaner. The condition of waste disposal can be observed from the observation panel in front of the waste disposal unit. The suction power of the medical vacuum cleaner can also be adjusted on the adjustment plate of the industrial vacuum cleaner.
After completing the above preparations, the capsule filling machine can start the follow-up work. Clean polishers and industrial vacuums promptly after each shift. If necessary, industrial vacuum cleaners should also be cleaned at the workplace.
(1) Speed regulation of polishing machine: electronic regulator is used. For fragile capsules, the speed can be moderately reduced and vice versa. The rotational speed of the polishing pad is adjustable.
(2) Adjust the inclination angle of the polishing drum: adjust the inclination angle of the polishing drum through the rear bracket, the larger the inclination angle, the better the polishing effect, the smaller the inclination angle, and the higher the production efficiency.
(3) Industrial vacuum adjustment of capsule filling machine: The professional industrial vacuum cleaner consists of two sets of washing tubes, each set of washing tubes is equipped with an absorbing air volume adjustment panel, and the air volume can be adjusted according to the usage.
IPv6 network supported 
Home
Products