-
How To Correctly Order Dies For Tablet Press?
Aug 04 , 2022
How to correctly order the punching die of the tablet press, in order to enable the pharmaceutical factory users to better order the appropriate punching die, it is recommended that the pharmaceutical factory user can fully discuss with the punching die pharmaceutical manufacturer to reduce possible production problems. 1. Due to some characteristics of rail design and processing technology, it is...
Read More
-
How To Properly Lubricate And Maintain The Tablet Press
Aug 04 , 2022
How to properly lubricate and maintain the tablet press requires more attention: (1) The lubrication of the friction surfaces of the moving parts of the rotary tablet press is an important link to ensure the normal operation of the machine and prolong its service life, especially if the main moving parts run dry in the absence of oil, they will be quickly damaged and cannot be used. . (2) Before u...
Read More
-
How To Use The Vacuum Pump Of The Blister Packaging Machine Correctly?
Aug 04 , 2022
What are the steps to correctly use the vacuum pump of the blister packaging machine? Start: After the oil level is determined, the vacuum pump can be started. Before starting the vacuum pump, the rotation direction must be checked after one start and every change of wiring. Operation: Before the blister packaging machine works normally, the valve of the intake pipe should be closed, and the pump ...
Read More
-
What Are The Factors That Affect The Effect Of The Capsule Filling Machine
Aug 12 , 2022
What are the factors that affect the effect of the capsule filling machine Richpacking analyzes the factors that affect the filling quality of automatic capsule filling machines. The method is to expound the factors affecting the filling quality of the automatic capsule filling machine by expounding the working principle of the automatic capsule filling machine, analyzing the workstation, and thro...
Read More
-
What Are The Feeding Methods Of The Tablet Press?
Aug 12 , 2022
The feeding system of the tablet press can generally be divided into three types: the shoe feeding system of the single punching machine, the moon feeding system of the low speed rotary tablet press, and the forced feeding part of the high speed press. The system of the single tablet press machine is compared with the structural characteristics of the stamping process. The main structure of the sh...
Read More
-
Why Does The Tablet Press Make Abnormal Noises?
Aug 12 , 2022
Why does the tablet press have abnormal noise? Generally, the abnormal noise of the tablet press has the following reasons: 1. When the synchronous pulley of the tablet press is not parallel, it will cause friction or even damage, resulting in abnormal noise. The solution is to adjust the motor so that the synchronous pulley on the main shaft is parallel to the synchronous pulley on the worm shaft...
Read More
-
Vacuum Feeder Plays A Huge Role In Capsule Filling Machine
Aug 12 , 2022
As a typical equipment of pharmaceutical enterprises, the automatic capsule filling machine can cycle in the process of automatic transmission, capsule filling, filling, sealing, etc., and is widely used in the pharmaceutical industry. The kinematics and dynamics of motion accuracy are related to the performance of the entire machine. At present, most of the capsule filling machines still use step...
Read More
-
Do You Know The Process Of Using The Capsule Filling Machine?
Aug 12 , 2022
During the filling process of hard capsules, the vacuum separator of the vacuum system of the capsule filling machine mainly sucks the capsules into the upper and lower modules, and separates the cap body. The vacuum separator moves up and down once at each position of the machine's rotating disk, and the machine shaft rotates once. The filter of the vacuum system should be opened periodically to ...
Read More
-
Application Of Omron In Blister Packaging Machine
Aug 15 , 2022
The difficulty of the blister packaging machine lies in the servo control for forming and blanking, which is mainly reflected in the synchronous traction and control voltage of the two engines, and the other two servo controls should also achieve synchronous motion control time as follows: In this case Omron uses two rotary encoders to detect the light of the rotation angle and eliminate the tract...
Read More
IPv6 network supported 
Home
Products