-
How Did The Tablet Press Innovate And Develop?
Oct 13 , 2022
The industry of tablet presses for the production of tablets in the pharmaceutical industry must also innovate and develop. Tablet press is a kind of automatic continuous production equipment, which is used to suppress objects with small diameters, circular plates and profiles with text, symbols and graphics. The tablet press is the main equipment that affects the pass rate of most quality and eco...
Read More
-
How Is The Capsule Filling Machine Developed?
Oct 13 , 2022
It is well known that some pharmaceutical companies in the process of producing capsules, because of the small size of the powder, have appearance defects when they are mechanically filled to produce products, which need to be eliminated by manual selection. The technicians of the pharmaceutical company analyzed the subject, and through the continuous optimization and debugging of the capsule fill...
Read More
-
What Is The Rotating Structure Of The Tablet Press
Oct 20 , 2022
Rotary tablet presses can be used as presses for brushes, carbon sheets and contacts. The power part is mainly composed of the transmission part and the working part. The working part consists of a table that rotates around an axis. The table is divided into three levels. The upper part of the platform is provided with an upper handle, the middle part is provided with a lower handle, and the lower...
Read More
-
What Are The Problems That Are Prone To Occur In Capsule Filling
Oct 20 , 2022
Variation in capsule load volume filled by capsule filling machines. The main reasons are capsule factors, drug factors, filling equipment factors and so on. If filling is required, the fluidity of the drug can be improved by adding appropriate excipients or granule preparation methods, and the filling equipment must be repaired and maintained in time to ensure its normal operation. Hygroscopic. T...
Read More
-
How To Adjust The Use Process Of Blister Packaging Machine
Oct 20 , 2022
First, adjust the forming box of the blister packaging machine, and adjust the synchronization of forming, heat sealing and punching steps. Loosen the lock nut at the bottom of the box, turn the handwheel to move the box horizontally, adjust the box to the required position, and tighten the nut. The lower forming die of the blister packer should be adjusted to align with the guide rails and keep i...
Read More
-
How To Adjust The Tablet Weight Of The Tablet Press
Oct 20 , 2022
During the punching process of the rotary tablet press, the weight difference of the tablets tends to increase. What should I do? (1) The length of the die of the rotary tablet press is uneven: the workpiece weight difference may increase, so a caliper should be used to check whether each punch is qualified. If individual reductions may be due to a failed expulsion motion and low particle fill, th...
Read More
-
What Are The Precautions For The Use Of Aluminum-Plastic Blister Packaging Machine
Oct 20 , 2022
In the process of operating the aluminum-plastic blister packaging machine, batch records and equipment operation records should be completed in time; Pay attention to the formation, high temperature heat sealing parts, pay attention to scalding; It is strictly forbidden to use foreign objects or reach out in the active area to avoid accidents; Regularly check the cable connection of the aluminum-...
Read More
-
Problems Prone To Occur In The Work Of Capsule Filling Machine
Nov 29 , 2022
There may be differences in the loading capacity during the operation of the capsule filling machine. The main reasons are capsule factors, drug factors, filling equipment factors and so on. If filling is required, the fluidity of the drug can be improved by adding appropriate excipients or granule preparation methods, and the filling equipment must be repaired and maintained in time to ensure its...
Read More
-
How To Adjust The Use Process Of Blister Packaging Machine
Nov 29 , 2022
How to adjust if there is a problem in the use of the blister packaging machine: First, adjust the forming box, and adjust the synchronization of forming, heat sealing, and punching steps. Loosen the lock nut at the bottom of the box, turn the hand wheel to move the box horizontally, adjust the box to the desired position, and tighten the nut. Adjust the molding lower mold so that it is aligned wi...
Read More