-
Operation Method of Intelligent Automatic Counting Machine
Jul 15 , 2022
Operation method of intelligent automatic counting machine 1. Operation of automatic counting machine Before operation (1) Check whether the glass turntable and vibrator have stopped. (2) Check the glass turntable and vibration discharge tank, and there must be no other debris. (3) Adjust the size of the tablet mouth (4) Orbiter adjustment method: 1. The outer orbiter and the inner orbiter should ...
Read More
-
How to Solve the Problem of Dust in the Tableting Process
Jul 15 , 2022
How to solve the problem of dust in the tableting process of powder Rotary tablet press. The following is a discussion of dust issues during tablet molding. 1. Analysis of the cause of dust: At present, the dust generated in the production and operation of high-speed rotary tablet press machine and screening machines in mainland China is generally removed by using a special vacuum cleaner to provi...
Read More
-
What Are The Ways To Reduce Dust In Tablet Presses?
Jul 22 , 2022
When using the tablet press, the method of reducing dust by manual feeding is to add a round cover to the hopper, and cover it in time to prevent the spread of dust after manual feeding. The vacuum feeder is used to seal the hopper to reduce the generation of dust during the stamping process. The method of reducing dust when the upper flush is running: After the feeder is dedusted, the dust suctio...
Read More
-
Technological Progress Of Tablet Press Machinery High-Speed
Jul 22 , 2022
With the continuous and the rapid developing of China's social economy and the GDP, pharmaceutical manufacturer have also developed intensively. So, in order to meet the needs of the pharma field industry, the original old type presses with an output of only 20,000 to 50,000 one hour can no longer meet the needs of the market. So , Guangdong Rich Packing Packing Machinery Co., Ltd. has accumulated...
Read More
-
Mould Replacement And Synchronous Adjustment Of Blister Packaging Machine
Jul 29 , 2022
Replacement of blister board-mounted molds: When the packaging shape changes, that is, when the quantity, size, variety and specifications of the packaging plate change, the molds and corresponding parts need to be replaced. The general steps for replacing the mold and the corresponding parts are: turn off the heating switch, cut off the water and gas sources, and turn all the switch knobs to the ...
Read More
-
How To Correctly Order Dies For Tablet Press?
Aug 04 , 2022
How to correctly order the punching die of the tablet press, in order to enable the pharmaceutical factory users to better order the appropriate punching die, it is recommended that the pharmaceutical factory user can fully discuss with the punching die pharmaceutical manufacturer to reduce possible production problems. 1. Due to some characteristics of rail design and processing technology, it is...
Read More
-
How To Properly Lubricate And Maintain The Tablet Press
Aug 04 , 2022
How to properly lubricate and maintain the tablet press requires more attention: (1) The lubrication of the friction surfaces of the moving parts of the rotary tablet press is an important link to ensure the normal operation of the machine and prolong its service life, especially if the main moving parts run dry in the absence of oil, they will be quickly damaged and cannot be used. . (2) Before u...
Read More
-
How To Use The Vacuum Pump Of The Blister Packaging Machine Correctly?
Aug 04 , 2022
What are the steps to correctly use the vacuum pump of the blister packaging machine? Start: After the oil level is determined, the vacuum pump can be started. Before starting the vacuum pump, the rotation direction must be checked after one start and every change of wiring. Operation: Before the blister packaging machine works normally, the valve of the intake pipe should be closed, and the pump ...
Read More
-
What Are The Feeding Methods Of The Tablet Press?
Aug 12 , 2022
The feeding system of the tablet press can generally be divided into three types: the shoe feeding system of the single punching machine, the moon feeding system of the low speed rotary tablet press, and the forced feeding part of the high speed press. The system of the single tablet press machine is compared with the structural characteristics of the stamping process. The main structure of the sh...
Read More
IPv6 network supported 
Home
Products