What Are The Influencing Factors Of Capsule Filling Machine
Sep 02, 2022
The factors that affect the quality of the automatic capsule filling machine include the occurrence of some common failures. If not dealt with in time, the quality of the equipment will also be affected. According to some manufacturers, the most common failure is that the capsule does not fall smoothly on the capsule slide, the outer diameter of each capsule is too large or the foreign body is blocked.
In this case, the qualified capsule should be replaced, and the foreign body should be removed with a tool. In addition, the operator should pay attention that the discharge plate cannot enter the plate hole, the opening and closing time of the pocket spring should be appropriate, and the position of the push claw and the pressure claw should be confirmed.
If the vacuum tube of the automatic capsule filling machine is not well sealed or the vacuum tube does not meet the requirements, the residual capsules can be removed, and foreign objects can be removed; adjust the position of the upper rod to fix the capsule plate; clean the filter, check the vacuum system, and adjust the gauge pressure. If the clutch is overloaded, it is likely due to excessive friction between the measuring plate and the seal ring due to the humidity of the powder. The friction between the filling rod and the measuring hole is too large; the distance between the measuring plate and the sealing ring is not enough.
Automatic capsule filling machine is an important equipment in capsule production. Capsule products can also be affected if there is a quality problem with the device. Therefore, in order to ensure the safty production of the capsules, at this stage of the equipment, the operator and manufacturer of the equipment must deal with the factors that affect the quality of automatic capsule filling.
IPv6 network supported 
Home
Products