-
Customized Requirements For Tablet Presses
Feb 16 , 2022
In the customized orders of our RICH PACKING company's past users, the diversified requirements for the structure are mainly reflected in the following aspects: In terms of film output, some require single-sided output, some require double-sided output, and some require both single-sided and double-sided output. This requires the design and transformation of the tablet output structure of the tabl...
Read More
-
Counting And Rejecting Of Tablet Presses
Feb 16 , 2022
The automatic tablet counting works using special sensors installed in the tablet press. A toothed counting disc is fixed on the outside of a pulley of the transmission part, and the number of teeth corresponds to the number of punches on the turntable of the tablet press. Below the teeth there is a fixed sensor that transmits electrical signals to the control system. In this way, the number of te...
Read More
-
Feeding And Filling Of Tablet Presses
Feb 16 , 2022
Most of the ordinary tablet presses use a grid-type feeder, that is, natural feeding. The die hole rotates around the axis and is filled in the die hole by the free fall of particles. After the rotation speed of the turntable is increased, this feeding method cannot be effective, especially the materials with low density and poor fluidity cannot fill the die hole. The sub-high-speed tablet press i...
Read More
-
Features of Aluminum-Plastic Blister Packaging Machine
Feb 22 , 2022
1. The PVC forming flat aluminum-plastic blister packaging machine reciprocates the mold up and down through the cam on the main drive shaft. When the PVC is pressed by the mold, it is blown and formed. This device effectively ensures the crispness of the light eye. Good molding quality even with the bubble wall, the reproducibility of even small parts is very clear, and it can pack large items wi...
Read More
-
Advantages Of Rich Packing Electronic Tablet Counting Machine
Mar 07 , 2022
The RICH PACKING electronic tablet counting machine has a wide range of applications. A single device can count products of different specifications and sizes, and it is easy to adjust between different specifications. Using an independent optical detection system for accurate counting to ensure a high degree of counting accuracy and speed; Adopt multi-stage vibration feeding, each level can disti...
Read More
-
Does The Particle Counting Machine Need To Install A Dust Collector?
Mar 07 , 2022
Most of the medicines have to go through many links in the processing process, and the most important link is the packaging of the medicines. Some tablets are plain, that is, they have not undergone a coating process. When the tablet is shaken or dropped, more dust will be generated. In order to pollute the situation in the workshop and restrain the dispersion of drug smell, and ensure the quality...
Read More
-
Factors Affecting The Normal Operation And Service Life Of The Tablet Press:
Mar 07 , 2022
1. Please test the quality of the tablet press mold repeatedly before use, whether there is a missing edge crack deformation and sealing, and whether the equipment is damaged or not. 2. Test whether the powder of the granule raw material is dry, and whether the powder content in the granule exceeds 10%. If it is different, please do not press hard, otherwise it will affect the normal operation and...
Read More
-
Installation And Adjustment Of Two-Color Tablet Press Die
Mar 07 , 2022
Before installing the mold of the two-color tablet press, the power source of the tablet pressing motor must be cut off, and the cover plate, the lower punch and the upper rail, the hopper and the feeder must be removed. Open the door on the right, and gradually clean the working surface of the turntable, the die hole and the die for installation, and apply some animal oil to the middle die and th...
Read More
-
Matters Needing Attention In The Use Of Rich Packing Laboratory Tablet Press
Mar 14 , 2022
When the small laboratory tablet press is not used for a long time, the oil drain valve should be slightly tightened before use. When the pressure increases to 5-10MPa, the load will be unloaded. Repeat 2-3 times in a row for normal use; The large piston 19 should not exceed the specified stroke, otherwise the tension spring will be deformed and the cylinder cannot return to the initial position. ...
Read More
IPv6 network supported 
Home
Products