-
How To Correctly Order Dies For Tablet Press?
Aug 04 , 2022
How to correctly order the punching die of the tablet press, in order to enable the pharmaceutical factory users to better order the appropriate punching die, it is recommended that the pharmaceutical factory user can fully discuss with the punching die pharmaceutical manufacturer to reduce possible production problems. 1. Due to some characteristics of rail design and processing technology, it is...
Read More
-
How To Adjust The Cam Of Blister Packing Machine?
Aug 04 , 2022
What is the installation sequence of the valve cam of the blister packaging machine on the shaft? First, from the inside to the outside, it is the traction and clamping cylinder cam, the back-stop cylinder cam, the forming blowing cam and the forming cylinder cam. When the return position of the heat sealing cam linkage heat sealing mold is very low, the valve cam is installed according to the pos...
Read More
-
How To Use The Vacuum Pump Of The Blister Packaging Machine Correctly?
Aug 04 , 2022
What are the steps to correctly use the vacuum pump of the blister packaging machine? Start: After the oil level is determined, the vacuum pump can be started. Before starting the vacuum pump, the rotation direction must be checked after one start and every change of wiring. Operation: Before the blister packaging machine works normally, the valve of the intake pipe should be closed, and the pump ...
Read More
-
How Has the Technology Of Chinese tablet press Advanced?
Aug 04 , 2022
China's novel tablet presses and tableting technologies emerge one after another under the increasingly updated technical support. 1. The rotary tablet press focuses on increasing the pre-pressure and improving the tableting quality is a common consideration for many tablet press manufacturers when launching new products. At the same time, the main pressure is the same as the pre-compression, whic...
Read More
-
Why Does The Tablet Press Make Abnormal Noises?
Aug 12 , 2022
Why does the tablet press have abnormal noise? Generally, the abnormal noise of the tablet press has the following reasons: 1. When the synchronous pulley of the tablet press is not parallel, it will cause friction or even damage, resulting in abnormal noise. The solution is to adjust the motor so that the synchronous pulley on the main shaft is parallel to the synchronous pulley on the worm shaft...
Read More
-
Application Of Omron In Blister Packaging Machine
Aug 15 , 2022
The difficulty of the blister packaging machine lies in the servo control for forming and blanking, which is mainly reflected in the synchronous traction and control voltage of the two engines, and the other two servo controls should also achieve synchronous motion control time as follows: In this case Omron uses two rotary encoders to detect the light of the rotation angle and eliminate the tract...
Read More
-
What To Prepare Before Operating The Tablet Press
Sep 02 , 2022
After the mold of the tablet press is installed, turn the steering wheel by hand to make the steering wheel turn 2-3 times, and observe the abnormal friction noise of the upper and lower impact rods on each track and each hole. Turn on the main power switch, the power indicator light is on, and the speed is 0. Press the vacuum cleaner start button, the vacuum cleaner running indicator lights up. N...
Read More
-
What Are The Influencing Factors Of Capsule Filling Machine
Sep 02 , 2022
The factors that affect the quality of the automatic capsule filling machine include the occurrence of some common failures. If not dealt with in time, the quality of the equipment will also be affected. According to some manufacturers, the most common failure is that the capsule does not fall smoothly on the capsule slide, the outer diameter of each capsule is too large or the foreign body is blo...
Read More
-
What Are The Characteristics Of The Materials For Packaging Medicines In Blister Packaging Machines?
Sep 05 , 2022
Our company's blister packaging machine can be used for packaging of various materials, among which PTP plastic cardboard is the most commonly used PVC cardboard. Although PVC has many advantages, such as good quality and low price, it is not very good in terms of moisture resistance, mildew resistance, water vapor resistance, and oxidation resistance. In addition, the production or use of PVC has...
Read More
IPv6 network supported 
Home
Products