-
Causes Of Dust In Rotary Tablet Press
Aug 16 , 2021
The primary task of the rotary tablet press is the continuous three-step sequence of filling, pressing, and discharging. The granular materials fall into the feeder through the hopper, and rely on the weight of the materials or are forced to fall into the hole of the middle mold. The lower punch and upper rail guide pushes the pressed sheet out of the middle die hole, and then flows into the sheet...
Read More
-
The Die Structure Of The Tablet Press
Sep 24 , 2021
The die is a tablet press die that suppresses the tablet. The task end faces of the upper and lower punches constitute the appearance of the tablet, and the aperture of the middle die is the diameter of the tablet. The punch die is the primary mission element of the tablet press RQ-ZP. Most of pairs of punching dies contain the three parts: as the upper punch, middle die, and these lower punch. Th...
Read More
-
The Structure Of The Forced Feeder Of The Tablet Press
Sep 24 , 2021
Many pharmaceutical and health care products in the production of solid tablets, is often encountered in the production of tablets, tablet weight, tablet thickness, hardness is not consistent, the down feeder clogging and other problems often need to stop the machine for maintenance resulting in low production efficiency as well as product quality can not be guaranteed. Most of these problems are ...
Read More
-
Improve The Precision Of The Finished Product Of The Tablet Press
Nov 26 , 2021
In the pharmaceutical machinery and equipment industry, with the continuous development of science and technology, new equipment continues to emerge, as is the field of tablet presses, which intensifies the competition in the industry, so there are higher requirements for the processing technology and precision of tablet press machine. , Improve the accuracy of the tablet press, you can enhance th...
Read More
-
The Solution To The Powder Leakage Of The Tablet Press
Nov 26 , 2021
The maintenance method of the rotary tablet press machine is specifically: the tablet press machine manufacturer needs to check the machine itself and parts regularly, basically check the turbine, bearing, compressor, crankshaft, upper and lower rail guides, etc., and solve the problem in time to avoid affecting the machine. In normal operation, after each use, you need to clean the remaining powd...
Read More
-
The Development Status Of Foreign Tablet Presses
Nov 26 , 2021
(1) High speed and high output High speed and high output is the goal that tablet press manufacturers have been pursuing for many years. To catch up with foreign countries in terms of speed and output, domestic tablet presses need to make great development in terms of tablet press design innovation, processing technology and automatic control. (2) The confinement of the tablet pressing process and...
Read More
-
Operation Rules Of Aluminum Plastic Blister Packaging Machine
Dec 28 , 2021
I. Pre-working conditions of the aluminum-plastic bubble cover machine: the last production clearance qualified, indoor temperature and humidity qualified. Personnel hygienic dress qualified. The machine is in good condition. Ii. Preparation before packaging: prepare hard sheets, aluminum foil and raw materials (such as powder and particles) suitable for the packaging capsule before packaging. The...
Read More
-
Common Problems Of Blister Packing Machine
Dec 28 , 2021
There are many forms of aluminum-plastic cartoning machines due to different manufacturers, and there are also differences in the performance levels of domestic and foreign products. At present, the existing aluminum-plastic cartoning machines can be roughly divided into the following four categories: roller continuous aluminum-plastic cartoning machines, plate-rolling continuous aluminum-plastic ...
Read More
-
How Does The Tablet Press Control The Tablet Weight
Dec 28 , 2021
Increase in tablet weight difference: In the process of adding tablets, the difference in weight cannot exceed the level stipulated in the pharmacopoeia to pass, but in the process of compression, it is often found that the difference in tablet weight increases. The reasons for the treatment are as follows: (1) Uneven punch length: It is easy to cause an increase in film weight difference, so use ...
Read More
IPv6 network supported 
Home
Products