-
How to Solve Tablet Press Dust Problems
Jan 06 , 2022
During the production process of rotary tablet presses, dust problems are something you will often encounter. Dust problems not only affect the quality of tablet production and reduce efficiency, they also cause wear and tear on your equipment and lead to breakdowns. This article will help you gain an in-depth understanding of the causes of dust and how to effectively address them, ensuring that y...
Read More
-
The Structure And Principle Characteristics Of High-Speed Tablet Press
Jan 06 , 2022
Our RICH PACKING high-speed tablet press is a machine that uses punching force to form powder with a turntable speed of more than 80R/Min. The rotation of the main shaft drives the pressure plate fixed at the upper and lower ends of the main shaft to rotate. The punch on the turntable is restrained by the upper and lower guide rails. Material forming is more than 3 times the production efficiency ...
Read More
-
Connection Technology Of Tablet Press
Feb 16 , 2022
A tablet press can be connected to a production line, both German and British tablet presses have this function. It has start, end and speed adjustment functions. Using this option function, it can be reliably and automatically connected with other equipment in the production line, such as sieving, vacuuming, testing, conveying, barreling, etc., to complete the tablet pressing production task sync...
Read More
-
Customized Requirements For Tablet Presses
Feb 16 , 2022
In the customized orders of our RICH PACKING company's past users, the diversified requirements for the structure are mainly reflected in the following aspects: In terms of film output, some require single-sided output, some require double-sided output, and some require both single-sided and double-sided output. This requires the design and transformation of the tablet output structure of the tabl...
Read More
-
Counting And Rejecting Of Tablet Presses
Feb 16 , 2022
The automatic tablet counting works using special sensors installed in the tablet press. A toothed counting disc is fixed on the outside of a pulley of the transmission part, and the number of teeth corresponds to the number of punches on the turntable of the tablet press. Below the teeth there is a fixed sensor that transmits electrical signals to the control system. In this way, the number of te...
Read More
-
Feeding And Filling Of Tablet Presses
Feb 16 , 2022
Most of the ordinary tablet presses use a grid-type feeder, that is, natural feeding. The die hole rotates around the axis and is filled in the die hole by the free fall of particles. After the rotation speed of the turntable is increased, this feeding method cannot be effective, especially the materials with low density and poor fluidity cannot fill the die hole. The sub-high-speed tablet press i...
Read More
-
Factors Affecting The Normal Operation And Service Life Of The Tablet Press:
Mar 07 , 2022
1. Please test the quality of the tablet press mold repeatedly before use, whether there is a missing edge crack deformation and sealing, and whether the equipment is damaged or not. 2. Test whether the powder of the granule raw material is dry, and whether the powder content in the granule exceeds 10%. If it is different, please do not press hard, otherwise it will affect the normal operation and...
Read More
-
Installation And Adjustment Of Two-Color Tablet Press Die
Mar 07 , 2022
Before installing the mold of the two-color tablet press, the power source of the tablet pressing motor must be cut off, and the cover plate, the lower punch and the upper rail, the hopper and the feeder must be removed. Open the door on the right, and gradually clean the working surface of the turntable, the die hole and the die for installation, and apply some animal oil to the middle die and th...
Read More
-
Matters Needing Attention In The Use Of Rich Packing Laboratory Tablet Press
Mar 14 , 2022
When the small laboratory tablet press is not used for a long time, the oil drain valve should be slightly tightened before use. When the pressure increases to 5-10MPa, the load will be unloaded. Repeat 2-3 times in a row for normal use; The large piston 19 should not exceed the specified stroke, otherwise the tension spring will be deformed and the cylinder cannot return to the initial position. ...
Read More
IPv6 network supported 
Home
Products