-
Parameter Setting Factors Of Capsule Counting Machine
Aug 24 , 2021
Some factors that affect the parameter setting of the capsule and tablet counter: ①The size of the outlet of the material silo has a great influence on the separation state of the material on the vibration plate. If the opening is too large, it will directly affect the amount of material flowing out and the speed is too fast, so it is not that the larger the opening, the faster the counting speed....
Read More
-
The Advantages Of Flat Blister Packaging Machine Selection | Richpacking020.com
Sep 04 , 2021
The blister forming mold and the heat-sealing mold adopted by the flat plate type aluminum plastic blister packer machine are both flat-shaped. And the entire blistering process includes the preheating→the intermittent blow molding→the intermittent filling→the intermittent plate heat sealing→the intermittent typing and embossing→the Intermittent blanking. The blister packaging ...
Read More
-
Introduction Of Flat Blister Packaging Machine | Richpacking020.com
Sep 10 , 2021
The DPP series flat-plate aluminum-plastic/aluminum-aluminum high-speed automatic blister packaging machine is based on the needs of complex customers, and integrates the advantages of international aluminum-aluminum and aluminum-plastic blister packing machines to implement innovative design, development, trial production and improvement. New product. Several models of DPP series 160 and 260 have...
Read More
-
Part One Of The Operation Of The Blister Packaging Machine | Richpacking020.com
Sep 10 , 2021
This Article Will Bring The Installation Of Pvc Rigid Sheet And Aluminum Foil Roll Of Blister Packaging Machine For Rich Packing Customers: Remove The Compression Nut And Stop Sleeve On The Film Reel, Put The Pvc Hard Film Or Aluminum Foil Roll On The Adjustment Sleeve, Install The Stop Sleeve And The Compression Nut And Tighten The Compression Nut To Make The Film Roll On The Adjustment Sleeve It...
Read More
-
The Die Structure Of The Tablet Press
Sep 24 , 2021
The die is a tablet press die that suppresses the tablet. The task end faces of the upper and lower punches constitute the appearance of the tablet, and the aperture of the middle die is the diameter of the tablet. The punch die is the primary mission element of the tablet press RQ-ZP. Most of pairs of punching dies contain the three parts: as the upper punch, middle die, and these lower punch. Th...
Read More
-
The Structure Of The Forced Feeder Of The Tablet Press
Sep 24 , 2021
Many pharmaceutical and health care products in the production of solid tablets, is often encountered in the production of tablets, tablet weight, tablet thickness, hardness is not consistent, the down feeder clogging and other problems often need to stop the machine for maintenance resulting in low production efficiency as well as product quality can not be guaranteed. Most of these problems are ...
Read More
-
The First Use Of Blister Packaging | Richpacking020.com
Oct 14 , 2021
The first blister package of the blister package machine is mainly used for pharmaceutical packaging. In order to restrain the convenience of taking bottled medicines such as glass bottles and plastic bottles in advance, the large investment in packaging production lines and other defects. In addition, the necessary amount of dosage packaging and small tablet packaging has become larger and larger...
Read More
-
Working Characteristics Of Blister Packaging Machine
Oct 28 , 2021
Flat-plate blister packaging machine operation process and working method: the molded plastic sheet is heated to a softened and plastic state at the flat-type preheating and disassembly, and is hauled by step-by-step disassembly to the flat-plate molding and disassembly, shortening the air to blow the softened hard plastic sheet (Or stamping and blow molding) into a blister, filling and disassembl...
Read More
-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
IPv6 network supported 
Home
Products