-
The Solution To The Problem Of Loose Tablets In The Tablet Press
Mar 21 , 2022
Tableting machine medicine is a device that has certain requirements for raw materials and production processes. For some novices, some problems will be encountered more or less in the process of tableting. Here are some frequently occurring problems. Summarize and summarize. Tablet machine loose tablet problem After the tablet is pressed, the hardness is not enough, and the surface is numb, and i...
Read More
-
How To Install A Punch In A High-Speed Rotary Tablet Press
Mar 28 , 2022
The high-speed rotary tablet press punch is mainly used to compress the granulated granular and powdery formula raw materials into various required round, rectangular, oval and other shapes of tablets. It is suitable for pharmaceutical factories, chemical factories, and food factories. Production and compression of various tablets, sugar tablets and calcium tablets. The significant equipment maint...
Read More
-
Tabletting Principle Of High-Speed Tablet Press Die
Mar 28 , 2022
A significant equipment maintenance advantage of the new punch table assembly comes from the greatly reduced number of parts required, all of which are less than the original 15%, reducing the correction link. At the same time, the use of the new dynamometer assembly does not require further improvements to the tablet press nor new tooling, so replacing a new die plate does not increase the manufa...
Read More
-
How To Distinguish The Molds Of High-Speed Tablet Presses
Mar 28 , 2022
The high-speed tablet press mold is made of alloy tool steel as raw material, and is manufactured by CNC numerical control system equipment. The processing accuracy can reach above level two, and the interchangeability is 100%; the font and pattern are engraved by computer; The cavity is polished with advanced fluid-level polishing equipment, so that the quality and precision of the tablet press m...
Read More
-
The Installation Method Of The Upper, Middle And Lower Punches Of The Tablet Press
Apr 06 , 2022
1. Middle mold installation: Loosen the embossed screw screwed on the upper track cover, pull out the cover, and lightly hit the middle mold from the punching hole with the middle mold stick to make the middle mold fit into the middle mold hole. The middle mold must not be higher than the working surface of the turntable, and should be checked one by one to avoid mistakes. When installing the midd...
Read More
-
The Main Purpose Of The High-Speed Rotary Tablet Press For Health Products:
Apr 06 , 2022
This machine is a double-press automatic rotary continuous tableting machine, which compresses granular raw materials into tablets. It is mainly used in the production of tablet in the pharmaceutical industry, and is also used in chemical, foods, electronics and other industrial sectors. All kinds of special-shaped tablet products can be compressed by opening special-shaped grooves on the machine ...
Read More
-
Working Analysis Of Tablet Press
Apr 11 , 2022
The high-speed tablet press is still a normal tablet press, but the basic principles of the tablet press operation are similar. The working principles of the tablet press include filling, quantitative, pre-pressing, main pressing, and tableting. The upper and lower punches are driven by punching discs, and the upper and lower dies move from left to right along the guide respectively. When the punc...
Read More
-
Hygroscopic Problems Of Capsule Filled Powders
Apr 11 , 2022
The quality of the finished product of the capsule filling machine is not only related to the machine, but also related to the humidity of the filling material. The hygroscopicity of powder is a manifestation of the affinity between substance molecules and water molecules, which is caused by the diffusion of water molecules into the inner layer of the drug through the gas-liquid interface. The wat...
Read More
-
Structural Analysis of Guangdong Rich Packing Automatic Counter Machine
Jun 09 , 2022
The structure of Guangdong Rich Packing automatic counter machine is analyzed as the blanking mechanism, the feeding mechanism, the counting mechanism and the double-feed gate structure. All of them all have their own characteristics: The main features of the bottling mechanism of the automatic counting machine: The feeding and bottling nozzle is customized according to the bottle types and ...
Read More
IPv6 network supported 
Home
Products