-
Introduction To The Die Of Tablet Press
Sep 28 , 2022
The die is the main component of the tablet press. The common faults in use are: the punch is worn and replaced with a new one, mainly because the pressure is too large, and the punch bend affects the weight difference of the tablet and must be replaced. The feeder is worn or installed incorrectly, and the turntable at the bottom of the feeder is close to the three-dimensional wear. The pressure o...
Read More
-
Problems And Solutions Of Tablet Presses
Oct 13 , 2022
1. The tableting machine may experience delayed disintegration during the tableting process, which means that the disintegration time exceeds the Pharmacopoeia regulations. Reasons for delayed disintegration: insufficient amount of disintegrant, large adhesive viscosity, large amount of hydrophobic lubricant, high pressure, and high tablet hardness. Solution: choose a good disintegrant, or increas...
Read More
-
The Technology Of Packaging Medicine In Blister Packaging Machine
Oct 13 , 2022
Product blister packaging means that the feeder of the blister packaging machine is filled with drugs, and the blister is formed by vacuum (blowing and suction) or compression molding. The material used is aluminum foil, under a certain pressure, at a certain temperature and time. Under the premise, it is formed by heat sealing and sealing with the base material. Blister packaging, also known as d...
Read More
-
How Did The Tablet Press Evolve And Transform?
Oct 13 , 2022
The scope of tablet production in my country is gradually expanding, and single-punch tablet presses can no longer meet the mass production needs of pharmaceutical companies. In such situations, multi-stroke twisting tablet presses are commonly used due to their high productivity. However, there are some limitations in the process of using the torsional tablet press. With the rapid development of ...
Read More
-
What Is The Rotating Structure Of The Tablet Press
Oct 20 , 2022
Rotary tablet presses can be used as presses for brushes, carbon sheets and contacts. The power part is mainly composed of the transmission part and the working part. The working part consists of a table that rotates around an axis. The table is divided into three levels. The upper part of the platform is provided with an upper handle, the middle part is provided with a lower handle, and the lower...
Read More
-
How To Adjust The Tablet Weight Of The Tablet Press
Oct 20 , 2022
During the punching process of the rotary tablet press, the weight difference of the tablets tends to increase. What should I do? (1) The length of the die of the rotary tablet press is uneven: the workpiece weight difference may increase, so a caliper should be used to check whether each punch is qualified. If individual reductions may be due to a failed expulsion motion and low particle fill, th...
Read More
-
How To Adjust The Use Process Of Blister Packaging Machine
Nov 29 , 2022
How to adjust if there is a problem in the use of the blister packaging machine: First, adjust the forming box, and adjust the synchronization of forming, heat sealing, and punching steps. Loosen the lock nut at the bottom of the box, turn the hand wheel to move the box horizontally, adjust the box to the desired position, and tighten the nut. Adjust the molding lower mold so that it is aligned wi...
Read More
-
How To Adjust The Tablet Weight During The Operation Of The Tablet Press
Nov 29 , 2022
During the punching process of the rotary tablet press, the weight difference of the tablet tends to increase, what should be done? (1) Uneven die length: The difference in workpiece weight may increase, so a caliper should be used to check whether each punch is qualified. Individual reductions should be checked to clear obstructions if they may be due to failure of the expulsion movement and low ...
Read More
-
What Are The Precautions For The Use Of Aluminum-Plastic Blister Packaging Machine
Nov 29 , 2022
What are the precautions for the use of aluminum-plastic blister packaging machine DPP Rich Packing? During the operation of the aluminum-plastic blister packaging machine, the batch records and equipment operation records should be completed in time; the operator should operate carefully in the high-temperature heat-sealed part to avoid being scalded; it is strictly forbidden to use foreign objec...
Read More