-
What To Prepare Before Operating The Tablet Press
Sep 02 , 2022
After the mold of the tablet press is installed, turn the steering wheel by hand to make the steering wheel turn 2-3 times, and observe the abnormal friction noise of the upper and lower impact rods on each track and each hole. Turn on the main power switch, the power indicator light is on, and the speed is 0. Press the vacuum cleaner start button, the vacuum cleaner running indicator lights up. N...
Read More
-
How To Save The Tablet Press Mold
Sep 02 , 2022
Tablet press machine molds are essential components in pharmaceutical manufacturing, ensuring that tablets are produced with consistent size, shape, and quality. However, because the production process requires a long time of high pressure and high frequency extrusion, the die is often subjected to wear, which leads to a decline in product quality and efficiency. How to extend the service life and...
Read More
-
What Are The Characteristics Of The Materials For Packaging Medicines In Blister Packaging Machines?
Sep 05 , 2022
Our company's blister packaging machine can be used for packaging of various materials, among which PTP plastic cardboard is the most commonly used PVC cardboard. Although PVC has many advantages, such as good quality and low price, it is not very good in terms of moisture resistance, mildew resistance, water vapor resistance, and oxidation resistance. In addition, the production or use of PVC has...
Read More
-
How To Solve The Problem Of Punch In Tablet Press
Sep 05 , 2022
When the tablet press is running, the up and down movement may not be normal, the main reason is that the adhesion between the material and the mold is strong, or even has occurred. This may be due to the high viscosity of the material, or due to high humidity in the room, or due to the increase in viscosity of the material as it absorbs moisture from the air, or due to insufficient lubricant or s...
Read More
-
How To Look At The Content And Hardness Of The Tablet Pressed By The Tablet Press
Sep 05 , 2022
The consistency and uniformity of the compressed content of the tablet press rotation is not suitable. Generally, it occurs in the tableting of pellets and small doses of medicines, the main medicine or percentage: in the tableting of pellets, the size of the particles is different due to the thickness and size. , The same material and layered material are completely mixed during the granulation p...
Read More
-
Development Of Progressive Blister Packaging For Blister Packaging Machines
Sep 05 , 2022
In addition to various bottle packaging, blister packaging can be considered as the most commonly used packaging for pharmaceutical packaging. Blister packs have many advantages and can provide patients with a single-dose package of medication that is convenient and economical. In addition, the aluminum-plastic blister packaging protects the performance of the medicine, with fast production speed,...
Read More
-
How To Solve Small Problems In The Process Of Tablet Pressing
Sep 14 , 2022
How to solve small problems in the process of tableting During the tableting process of the tablet press, various small problems are often faced, such as particles being too dry, lack of water, or due to excessively humid air, or due to abnormal tablet presses, such as heavy head and die grinding damage, Causes sticking and spotting on surfaces, over-limited weight differences, laminations, hemp e...
Read More
-
What Is The Process Of The Blister Packaging Machine
Sep 14 , 2022
What is the process of the blister packaging machine The lower die base and the lower die of the blister packaging machine are fixedly connected to the base together, while the upper die moves vertically under the drive of the rotating cam. When the upper and lower die are closed, blowing into the molding cavity through the channel of the lower die holder Compressed air, the aluminum-plastic film ...
Read More
-
How To Clean The Blister Packaging Machine
Sep 14 , 2022
How to clean the blister packaging machine When the blister packaging machine is out of use, first remove the used waste PVC reels and aluminum foil reels according to the installation procedure, and collect them into waste buckets. Unscrew the nut on the indentation plate, remove the indentation cover and place it on the console, unscrew the module fixing nut, wipe it with alcohol, and then screw...
Read More