-
Why Does The Tablet Press Make Abnormal Noises?
Aug 12 , 2022
Why does the tablet press have abnormal noise? Generally, the abnormal noise of the tablet press has the following reasons: 1. When the synchronous pulley of the tablet press is not parallel, it will cause friction or even damage, resulting in abnormal noise. The solution is to adjust the motor so that the synchronous pulley on the main shaft is parallel to the synchronous pulley on the worm shaft...
Read More
-
Application Of Omron In Blister Packaging Machine
Aug 15 , 2022
The difficulty of the blister packaging machine lies in the servo control for forming and blanking, which is mainly reflected in the synchronous traction and control voltage of the two engines, and the other two servo controls should also achieve synchronous motion control time as follows: In this case Omron uses two rotary encoders to detect the light of the rotation angle and eliminate the tract...
Read More
-
What To Prepare Before Operating The Tablet Press
Sep 02 , 2022
After the mold of the tablet press is installed, turn the steering wheel by hand to make the steering wheel turn 2-3 times, and observe the abnormal friction noise of the upper and lower impact rods on each track and each hole. Turn on the main power switch, the power indicator light is on, and the speed is 0. Press the vacuum cleaner start button, the vacuum cleaner running indicator lights up. N...
Read More
-
How To Save The Tablet Press Mold
Sep 02 , 2022
Tablet press machine molds are essential components in pharmaceutical manufacturing, ensuring that tablets are produced with consistent size, shape, and quality. However, because the production process requires a long time of high pressure and high frequency extrusion, the die is often subjected to wear, which leads to a decline in product quality and efficiency. How to extend the service life and...
Read More
-
What Are The Characteristics Of The Materials For Packaging Medicines In Blister Packaging Machines?
Sep 05 , 2022
Our company's blister packaging machine can be used for packaging of various materials, among which PTP plastic cardboard is the most commonly used PVC cardboard. Although PVC has many advantages, such as good quality and low price, it is not very good in terms of moisture resistance, mildew resistance, water vapor resistance, and oxidation resistance. In addition, the production or use of PVC has...
Read More
-
Development Of Progressive Blister Packaging For Blister Packaging Machines
Sep 05 , 2022
In addition to various bottle packaging, blister packaging can be considered as the most commonly used packaging for pharmaceutical packaging. Blister packs have many advantages and can provide patients with a single-dose package of medication that is convenient and economical. In addition, the aluminum-plastic blister packaging protects the performance of the medicine, with fast production speed,...
Read More
-
How To Solve Small Problems In The Process Of Tablet Pressing
Sep 14 , 2022
How to solve small problems in the process of tableting During the tableting process of the tablet press, various small problems are often faced, such as particles being too dry, lack of water, or due to excessively humid air, or due to abnormal tablet presses, such as heavy head and die grinding damage, Causes sticking and spotting on surfaces, over-limited weight differences, laminations, hemp e...
Read More
-
How To Clean The Blister Packaging Machine
Sep 14 , 2022
How to clean the blister packaging machine When the blister packaging machine is out of use, first remove the used waste PVC reels and aluminum foil reels according to the installation procedure, and collect them into waste buckets. Unscrew the nut on the indentation plate, remove the indentation cover and place it on the console, unscrew the module fixing nut, wipe it with alcohol, and then screw...
Read More
-
Why Do Capsule Filling Opportunities Have Empty Capsule Problems
Sep 28 , 2022
Why do capsule filling opportunities have empty capsule problems The main reasons for empty capsules in the production process of the automatic capsule filling machine may be: small capsules in the capsule shell, abnormal rejection of the capsule filling machine, failure of the particle sensor, etc. There are small capsules in the capsule shell of the filling machine, and the waste rejection funct...
Read More
IPv6 network supported 
Home
Products