-
What Should I Do If The Tablet Press Often Has Chipping Problems?
Aug 09 , 2021
The tablet press is a machine that presses dry granular or powdery materials into tablets through a mold. According to different models, tablet presses can be divided into single-punch tablet presses, flower basket tablet presses, rotary tablet presses, sub-high-speed rotary tablet presses, fully automatic high-speed tablet presses and rotary core-spun presses Tableting machine. The function and a...
Read More
-
Causes Of Dust In Rotary Tablet Press
Aug 16 , 2021
The primary task of the rotary tablet press is the continuous three-step sequence of filling, pressing, and discharging. The granular materials fall into the feeder through the hopper, and rely on the weight of the materials or are forced to fall into the hole of the middle mold. The lower punch and upper rail guide pushes the pressed sheet out of the middle die hole, and then flows into the sheet...
Read More
-
The Die Structure Of The Tablet Press
Sep 24 , 2021
The die is a tablet press die that suppresses the tablet. The task end faces of the upper and lower punches constitute the appearance of the tablet, and the aperture of the middle die is the diameter of the tablet. The punch die is the primary mission element of the tablet press RQ-ZP. Most of pairs of punching dies contain the three parts: as the upper punch, middle die, and these lower punch. Th...
Read More
-
The Structure Of The Forced Feeder Of The Tablet Press
Sep 24 , 2021
Many pharmaceutical and health care products in the production of solid tablets, is often encountered in the production of tablets, tablet weight, tablet thickness, hardness is not consistent, the down feeder clogging and other problems often need to stop the machine for maintenance resulting in low production efficiency as well as product quality can not be guaranteed. Most of these problems are ...
Read More
-
The Problem Of The Splicing Table Of The Blister Packaging Machine
Oct 28 , 2021
The splicing table of the blister packaging machine is the docking station for PVC. At the same time, the splicing table has two cylinders to control the release and shutdown protection of the PVC. When the clamping cylinder is released, the forming step is pulled; when the clamping cylinder clamps the PVC Then the forming traction reaches the end of the traction; the third function of the splicin...
Read More
-
Working Characteristics Of Blister Packaging Machine
Oct 28 , 2021
Flat-plate blister packaging machine operation process and working method: the molded plastic sheet is heated to a softened and plastic state at the flat-type preheating and disassembly, and is hauled by step-by-step disassembly to the flat-plate molding and disassembly, shortening the air to blow the softened hard plastic sheet (Or stamping and blow molding) into a blister, filling and disassembl...
Read More
-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
-
Improve The Precision Of The Finished Product Of The Tablet Press
Nov 26 , 2021
In the pharmaceutical machinery and equipment industry, with the continuous development of science and technology, new equipment continues to emerge, as is the field of tablet presses, which intensifies the competition in the industry, so there are higher requirements for the processing technology and precision of tablet press machine. , Improve the accuracy of the tablet press, you can enhance th...
Read More
-
The Solution To The Powder Leakage Of The Tablet Press
Nov 26 , 2021
The maintenance method of the rotary tablet press machine is specifically: the tablet press machine manufacturer needs to check the machine itself and parts regularly, basically check the turbine, bearing, compressor, crankshaft, upper and lower rail guides, etc., and solve the problem in time to avoid affecting the machine. In normal operation, after each use, you need to clean the remaining powd...
Read More