-
The Development Status Of Foreign Tablet Presses
Nov 26 , 2021
(1) High speed and high output High speed and high output is the goal that tablet press manufacturers have been pursuing for many years. To catch up with foreign countries in terms of speed and output, domestic tablet presses need to make great development in terms of tablet press design innovation, processing technology and automatic control. (2) The confinement of the tablet pressing process and...
Read More
-
The Basic Operation Of Starting The Blister Machine
Dec 08 , 2021
The first is the first installation of the packaging material PVC rigid film and aluminum foil roll of blister packing machine: remove the compression nut and stop sleeve on the film reel, put the PVC rigid film or aluminum foil roll on the adjusting sleeve, install the stop sleeve and press tightly Screw the nut and tighten the nut so that the film cannot be loosened or rotated on the adjusting s...
Read More
-
Common Problems Of Blister Packing Machine
Dec 28 , 2021
There are many forms of aluminum-plastic cartoning machines due to different manufacturers, and there are also differences in the performance levels of domestic and foreign products. At present, the existing aluminum-plastic cartoning machines can be roughly divided into the following four categories: roller continuous aluminum-plastic cartoning machines, plate-rolling continuous aluminum-plastic ...
Read More
-
How Does The Tablet Press Control The Tablet Weight
Dec 28 , 2021
Increase in tablet weight difference: In the process of adding tablets, the difference in weight cannot exceed the level stipulated in the pharmacopoeia to pass, but in the process of compression, it is often found that the difference in tablet weight increases. The reasons for the treatment are as follows: (1) Uneven punch length: It is easy to cause an increase in film weight difference, so use ...
Read More
-
The Structure And Principle Characteristics Of High-Speed Tablet Press
Jan 06 , 2022
Our RICH PACKING high-speed tablet press is a machine that uses punching force to form powder with a turntable speed of more than 80R/Min. The rotation of the main shaft drives the pressure plate fixed at the upper and lower ends of the main shaft to rotate. The punch on the turntable is restrained by the upper and lower guide rails. Material forming is more than 3 times the production efficiency ...
Read More
-
Connection Technology Of Tablet Press
Feb 16 , 2022
A tablet press can be connected to a production line, both German and British tablet presses have this function. It has start, end and speed adjustment functions. Using this option function, it can be reliably and automatically connected with other equipment in the production line, such as sieving, vacuuming, testing, conveying, barreling, etc., to complete the tablet pressing production task sync...
Read More
-
Customized Requirements For Tablet Presses
Feb 16 , 2022
In the customized orders of our RICH PACKING company's past users, the diversified requirements for the structure are mainly reflected in the following aspects: In terms of film output, some require single-sided output, some require double-sided output, and some require both single-sided and double-sided output. This requires the design and transformation of the tablet output structure of the tabl...
Read More
-
Counting And Rejecting Of Tablet Presses
Feb 16 , 2022
The automatic tablet counting works using special sensors installed in the tablet press. A toothed counting disc is fixed on the outside of a pulley of the transmission part, and the number of teeth corresponds to the number of punches on the turntable of the tablet press. Below the teeth there is a fixed sensor that transmits electrical signals to the control system. In this way, the number of te...
Read More
-
Feeding And Filling Of Tablet Presses
Feb 16 , 2022
Most of the ordinary tablet presses use a grid-type feeder, that is, natural feeding. The die hole rotates around the axis and is filled in the die hole by the free fall of particles. After the rotation speed of the turntable is increased, this feeding method cannot be effective, especially the materials with low density and poor fluidity cannot fill the die hole. The sub-high-speed tablet press i...
Read More
IPv6 network supported 
Home
Products