-
Feeding And Filling Of Tablet Presses
Feb 16 , 2022
Most of the ordinary tablet presses use a grid-type feeder, that is, natural feeding. The die hole rotates around the axis and is filled in the die hole by the free fall of particles. After the rotation speed of the turntable is increased, this feeding method cannot be effective, especially the materials with low density and poor fluidity cannot fill the die hole. The sub-high-speed tablet press i...
Read More
-
Factors Affecting The Normal Operation And Service Life Of The Tablet Press:
Mar 07 , 2022
1. Please test the quality of the tablet press mold repeatedly before use, whether there is a missing edge crack deformation and sealing, and whether the equipment is damaged or not. 2. Test whether the powder of the granule raw material is dry, and whether the powder content in the granule exceeds 10%. If it is different, please do not press hard, otherwise it will affect the normal operation and...
Read More
-
Installation And Adjustment Of Two-Color Tablet Press Die
Mar 07 , 2022
Before installing the mold of the two-color tablet press, the power source of the tablet pressing motor must be cut off, and the cover plate, the lower punch and the upper rail, the hopper and the feeder must be removed. Open the door on the right, and gradually clean the working surface of the turntable, the die hole and the die for installation, and apply some animal oil to the middle die and th...
Read More
-
Matters Needing Attention In The Use Of Rich Packing Laboratory Tablet Press
Mar 14 , 2022
When the small laboratory tablet press is not used for a long time, the oil drain valve should be slightly tightened before use. When the pressure increases to 5-10MPa, the load will be unloaded. Repeat 2-3 times in a row for normal use; The large piston 19 should not exceed the specified stroke, otherwise the tension spring will be deformed and the cylinder cannot return to the initial position. ...
Read More
-
Regular Maintenance Of High-Speed Rotary Tablet Press
Mar 21 , 2022
At present, the high-speed twisting tablet press for health care products is a double-pressing active twisting and continuous tableting machine, which compresses granular raw materials into tablets. It is mainly used in the production of tablets in the pharmaceutical industry, and is also used in chemical, food, electronics and other industrial sectors. The mechanical turntable can open special-sh...
Read More
-
The Solution To The Problem Of Loose Tablets In The Tablet Press
Mar 21 , 2022
Tableting machine medicine is a device that has certain requirements for raw materials and production processes. For some novices, some problems will be encountered more or less in the process of tableting. Here are some frequently occurring problems. Summarize and summarize. Tablet machine loose tablet problem After the tablet is pressed, the hardness is not enough, and the surface is numb, and i...
Read More
-
How To Install A Punch In A High-Speed Rotary Tablet Press
Mar 28 , 2022
The high-speed rotary tablet press punch is mainly used to compress the granulated granular and powdery formula raw materials into various required round, rectangular, oval and other shapes of tablets. It is suitable for pharmaceutical factories, chemical factories, and food factories. Production and compression of various tablets, sugar tablets and calcium tablets. The significant equipment maint...
Read More
-
Tabletting Principle Of High-Speed Tablet Press Die
Mar 28 , 2022
A significant equipment maintenance advantage of the new punch table assembly comes from the greatly reduced number of parts required, all of which are less than the original 15%, reducing the correction link. At the same time, the use of the new dynamometer assembly does not require further improvements to the tablet press nor new tooling, so replacing a new die plate does not increase the manufa...
Read More
-
How To Distinguish The Molds Of High-Speed Tablet Presses
Mar 28 , 2022
The high-speed tablet press mold is made of alloy tool steel as raw material, and is manufactured by CNC numerical control system equipment. The processing accuracy can reach above level two, and the interchangeability is 100%; the font and pattern are engraved by computer; The cavity is polished with advanced fluid-level polishing equipment, so that the quality and precision of the tablet press m...
Read More
IPv6 network supported 
Home
Products