-
The Basic Operation Of Starting The Blister Machine
Dec 08 , 2021
The first is the first installation of the packaging material PVC rigid film and aluminum foil roll of blister packing machine: remove the compression nut and stop sleeve on the film reel, put the PVC rigid film or aluminum foil roll on the adjusting sleeve, install the stop sleeve and press tightly Screw the nut and tighten the nut so that the film cannot be loosened or rotated on the adjusting s...
Read More
-
Feeding And Filling Of Tablet Presses
Feb 16 , 2022
Most of the ordinary tablet presses use a grid-type feeder, that is, natural feeding. The die hole rotates around the axis and is filled in the die hole by the free fall of particles. After the rotation speed of the turntable is increased, this feeding method cannot be effective, especially the materials with low density and poor fluidity cannot fill the die hole. The sub-high-speed tablet press i...
Read More
-
Installation And Adjustment Of Two-Color Tablet Press Die
Mar 07 , 2022
Before installing the mold of the two-color tablet press, the power source of the tablet pressing motor must be cut off, and the cover plate, the lower punch and the upper rail, the hopper and the feeder must be removed. Open the door on the right, and gradually clean the working surface of the turntable, the die hole and the die for installation, and apply some animal oil to the middle die and th...
Read More
-
The Solution To The Problem Of Loose Tablets In The Tablet Press
Mar 21 , 2022
Tableting machine medicine is a device that has certain requirements for raw materials and production processes. For some novices, some problems will be encountered more or less in the process of tableting. Here are some frequently occurring problems. Summarize and summarize. Tablet machine loose tablet problem After the tablet is pressed, the hardness is not enough, and the surface is numb, and i...
Read More
-
Tabletting Principle Of High-Speed Tablet Press Die
Mar 28 , 2022
A significant equipment maintenance advantage of the new punch table assembly comes from the greatly reduced number of parts required, all of which are less than the original 15%, reducing the correction link. At the same time, the use of the new dynamometer assembly does not require further improvements to the tablet press nor new tooling, so replacing a new die plate does not increase the manufa...
Read More
-
How To Distinguish The Molds Of High-Speed Tablet Presses
Mar 28 , 2022
The high-speed tablet press mold is made of alloy tool steel as raw material, and is manufactured by CNC numerical control system equipment. The processing accuracy can reach above level two, and the interchangeability is 100%; the font and pattern are engraved by computer; The cavity is polished with advanced fluid-level polishing equipment, so that the quality and precision of the tablet press m...
Read More
-
The Installation Method Of The Upper, Middle And Lower Punches Of The Tablet Press
Apr 06 , 2022
1. Middle mold installation: Loosen the embossed screw screwed on the upper track cover, pull out the cover, and lightly hit the middle mold from the punching hole with the middle mold stick to make the middle mold fit into the middle mold hole. The middle mold must not be higher than the working surface of the turntable, and should be checked one by one to avoid mistakes. When installing the midd...
Read More
-
Working Analysis Of Tablet Press
Apr 11 , 2022
The high-speed tablet press is still a normal tablet press, but the basic principles of the tablet press operation are similar. The working principles of the tablet press include filling, quantitative, pre-pressing, main pressing, and tableting. The upper and lower punches are driven by punching discs, and the upper and lower dies move from left to right along the guide respectively. When the punc...
Read More
-
Structural Analysis of Guangdong Rich Packing Automatic Counter Machine
Jun 09 , 2022
The structure of Guangdong Rich Packing automatic counter machine is analyzed as the blanking mechanism, the feeding mechanism, the counting mechanism and the double-feed gate structure. All of them all have their own characteristics: The main features of the bottling mechanism of the automatic counting machine: The feeding and bottling nozzle is customized according to the bottle types and ...
Read More
IPv6 network supported 
Home
Products