-
The Basic Operation Of Starting The Blister Machine
Dec 08 , 2021
The first is the first installation of the packaging material PVC rigid film and aluminum foil roll of blister packing machine: remove the compression nut and stop sleeve on the film reel, put the PVC rigid film or aluminum foil roll on the adjusting sleeve, install the stop sleeve and press tightly Screw the nut and tighten the nut so that the film cannot be loosened or rotated on the adjusting s...
Read More
-
The Composition Of The Blister Packaging Machine Depends On These Four Parts
Dec 22 , 2021
The blister packaging machine is a machine that forms a blister with a transparent plastic film or sheet, and seals the product between the blister and the bottom plate by means of heat sealing, bonding, etc. The composition of the blister packaging machine: The blister packaging equipment for medicines is basically similar to the blister packaging equipment for other products, and mainly consists...
Read More
-
How Does The Tablet Press Control The Tablet Weight
Dec 28 , 2021
Increase in tablet weight difference: In the process of adding tablets, the difference in weight cannot exceed the level stipulated in the pharmacopoeia to pass, but in the process of compression, it is often found that the difference in tablet weight increases. The reasons for the treatment are as follows: (1) Uneven punch length: It is easy to cause an increase in film weight difference, so use ...
Read More
-
How to Solve Tablet Press Dust Problems
Jan 06 , 2022
During the production process of rotary tablet presses, dust problems are something you will often encounter. Dust problems not only affect the quality of tablet production and reduce efficiency, they also cause wear and tear on your equipment and lead to breakdowns. This article will help you gain an in-depth understanding of the causes of dust and how to effectively address them, ensuring that y...
Read More
-
The Structure And Principle Characteristics Of High-Speed Tablet Press
Jan 06 , 2022
Our RICH PACKING high-speed tablet press is a machine that uses punching force to form powder with a turntable speed of more than 80R/Min. The rotation of the main shaft drives the pressure plate fixed at the upper and lower ends of the main shaft to rotate. The punch on the turntable is restrained by the upper and lower guide rails. Material forming is more than 3 times the production efficiency ...
Read More
-
Heat Sealing Precautions For Blister Packing Machine
Feb 14 , 2022
Heat sealing is a crucial step in the operation process of blister packing machine. The quality of heat sealing directly determines the sealing of the package, which in turn affects the integrity and safety of the product. If not operated properly, the product may leak and break during transportation and storage, and even affect the service life of the product. To ensure the sealing effect, you ne...
Read More
-
Connection Technology Of Tablet Press
Feb 16 , 2022
A tablet press can be connected to a production line, both German and British tablet presses have this function. It has start, end and speed adjustment functions. Using this option function, it can be reliably and automatically connected with other equipment in the production line, such as sieving, vacuuming, testing, conveying, barreling, etc., to complete the tablet pressing production task sync...
Read More
-
Customized Requirements For Tablet Presses
Feb 16 , 2022
In the customized orders of our RICH PACKING company's past users, the diversified requirements for the structure are mainly reflected in the following aspects: In terms of film output, some require single-sided output, some require double-sided output, and some require both single-sided and double-sided output. This requires the design and transformation of the tablet output structure of the tabl...
Read More
-
Counting And Rejecting Of Tablet Presses
Feb 16 , 2022
The automatic tablet counting works using special sensors installed in the tablet press. A toothed counting disc is fixed on the outside of a pulley of the transmission part, and the number of teeth corresponds to the number of punches on the turntable of the tablet press. Below the teeth there is a fixed sensor that transmits electrical signals to the control system. In this way, the number of te...
Read More