-
Part One Of The Operation Of The Blister Packaging Machine | Richpacking020.com
Sep 10 , 2021
This Article Will Bring The Installation Of Pvc Rigid Sheet And Aluminum Foil Roll Of Blister Packaging Machine For Rich Packing Customers: Remove The Compression Nut And Stop Sleeve On The Film Reel, Put The Pvc Hard Film Or Aluminum Foil Roll On The Adjustment Sleeve, Install The Stop Sleeve And The Compression Nut And Tighten The Compression Nut To Make The Film Roll On The Adjustment Sleeve It...
Read More
-
The Die Structure Of The Tablet Press
Sep 24 , 2021
The die is a tablet press die that suppresses the tablet. The task end faces of the upper and lower punches constitute the appearance of the tablet, and the aperture of the middle die is the diameter of the tablet. The punch die is the primary mission element of the tablet press RQ-ZP. Most of pairs of punching dies contain the three parts: as the upper punch, middle die, and these lower punch. Th...
Read More
-
The Structure Of The Forced Feeder Of The Tablet Press
Sep 24 , 2021
Many pharmaceutical and health care products in the production of solid tablets, is often encountered in the production of tablets, tablet weight, tablet thickness, hardness is not consistent, the down feeder clogging and other problems often need to stop the machine for maintenance resulting in low production efficiency as well as product quality can not be guaranteed. Most of these problems are ...
Read More
-
Working Characteristics Of Blister Packaging Machine
Oct 28 , 2021
Flat-plate blister packaging machine operation process and working method: the molded plastic sheet is heated to a softened and plastic state at the flat-type preheating and disassembly, and is hauled by step-by-step disassembly to the flat-plate molding and disassembly, shortening the air to blow the softened hard plastic sheet (Or stamping and blow molding) into a blister, filling and disassembl...
Read More
-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
-
Improve The Precision Of The Finished Product Of The Tablet Press
Nov 26 , 2021
In the pharmaceutical machinery and equipment industry, with the continuous development of science and technology, new equipment continues to emerge, as is the field of tablet presses, which intensifies the competition in the industry, so there are higher requirements for the processing technology and precision of tablet press machine. , Improve the accuracy of the tablet press, you can enhance th...
Read More
-
The Solution To The Powder Leakage Of The Tablet Press
Nov 26 , 2021
The maintenance method of the rotary tablet press machine is specifically: the tablet press machine manufacturer needs to check the machine itself and parts regularly, basically check the turbine, bearing, compressor, crankshaft, upper and lower rail guides, etc., and solve the problem in time to avoid affecting the machine. In normal operation, after each use, you need to clean the remaining powd...
Read More
-
The Development Status Of Foreign Tablet Presses
Nov 26 , 2021
(1) High speed and high output High speed and high output is the goal that tablet press manufacturers have been pursuing for many years. To catch up with foreign countries in terms of speed and output, domestic tablet presses need to make great development in terms of tablet press design innovation, processing technology and automatic control. (2) The confinement of the tablet pressing process and...
Read More
-
The Basic Operation Of Starting The Blister Machine
Dec 08 , 2021
The first is the first installation of the packaging material PVC rigid film and aluminum foil roll of blister packing machine: remove the compression nut and stop sleeve on the film reel, put the PVC rigid film or aluminum foil roll on the adjusting sleeve, install the stop sleeve and press tightly Screw the nut and tighten the nut so that the film cannot be loosened or rotated on the adjusting s...
Read More