ZP 29D Automatic Pill Maker Tablet Press Machine

ZP 29D Automatic Pill Maker Tablet Press Machine By Rich Packing

Guangdong Guangzhou RICH PACKING Paracetamol Tablet Press Machine Pill Maker has a 3-year warranty and fast delivery time in 2 weeks. The outside cover is a casting of one-piece. The groove is equipped with the pressure wheels. 29D is sleeved on the crankshaft. The mechanical rods are connected to the coil spring at the outer end of the shafts. Tightening increases the interval between the lower pressure hand wheels, reduces the pressure to maintain the safety use of the molds and the moulds, adjusts the pressure to twist the flower handles to change the length of the pressure spring, so that the spring pressure is very sufficient.
The machine’s guide plate is in the shape of a disc, and the heat-treated guide rails are embedded around 29D, and the guide rails are fixed with the screws. The groove at the tails of the upper pressing hole is extended along the convex edge of the guide rails, and the guide rails are high and low. The turntable is the whole casting with 29 die holes evenly distributed vertically. The whole is set on the fixed vertical axis. All these turntables fix all punches and the twist clockwise.
The drive shaft of the two color tablet press is installed in the bearing bracket, with the worm in the middle, an experimental hand wheel at the front of machinery, and a conical disc condenser at the rear, a handle control switch, and a workshop parking space. The contact passes through the pressure notification of the coil springs. If the loading of the machine exceeds the pressure of the protection spring, slippage will occur, so 29D will not seriously damage the machine.

***  Technical parameter

***  Configuration List