-
Replacing The Dosing Plate And Filling Rod Of The Capsule Filling Machine
Oct 10 , 2021
1. Loosen The Fastening Screw Of Capsule Filling Machine To Raise The Powder Hopper With Spring Force; 2. Use A Vacuum Cleaner To Remove The Remaining Powder In The Medicine Pool Ring; 3. Use The Handle To Move The Main Engine To Make The Punch Seat At The Highest Position; 4. Loosen And Remove The Cap Nut, Turn The Knob Clockwise To Raise The Pressure Plate And The Filling Holder And Lift It Off;...
Read More
-
Working Characteristics Of Blister Packaging Machine
Oct 28 , 2021
Flat-plate blister packaging machine operation process and working method: the molded plastic sheet is heated to a softened and plastic state at the flat-type preheating and disassembly, and is hauled by step-by-step disassembly to the flat-plate molding and disassembly, shortening the air to blow the softened hard plastic sheet (Or stamping and blow molding) into a blister, filling and disassembl...
Read More
-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
-
Improve The Precision Of The Finished Product Of The Tablet Press
Nov 26 , 2021
In the pharmaceutical machinery and equipment industry, with the continuous development of science and technology, new equipment continues to emerge, as is the field of tablet presses, which intensifies the competition in the industry, so there are higher requirements for the processing technology and precision of tablet press machine. , Improve the accuracy of the tablet press, you can enhance th...
Read More
-
The Solution To The Powder Leakage Of The Tablet Press
Nov 26 , 2021
The maintenance method of the rotary tablet press machine is specifically: the tablet press machine manufacturer needs to check the machine itself and parts regularly, basically check the turbine, bearing, compressor, crankshaft, upper and lower rail guides, etc., and solve the problem in time to avoid affecting the machine. In normal operation, after each use, you need to clean the remaining powd...
Read More
-
The Development Status Of Foreign Tablet Presses
Nov 26 , 2021
(1) High speed and high output High speed and high output is the goal that tablet press manufacturers have been pursuing for many years. To catch up with foreign countries in terms of speed and output, domestic tablet presses need to make great development in terms of tablet press design innovation, processing technology and automatic control. (2) The confinement of the tablet pressing process and...
Read More
-
The Basic Operation Of Starting The Blister Machine
Dec 08 , 2021
The first is the first installation of the packaging material PVC rigid film and aluminum foil roll of blister packing machine: remove the compression nut and stop sleeve on the film reel, put the PVC rigid film or aluminum foil roll on the adjusting sleeve, install the stop sleeve and press tightly Screw the nut and tighten the nut so that the film cannot be loosened or rotated on the adjusting s...
Read More
-
The Composition Of The Blister Packaging Machine Depends On These Four Parts
Dec 22 , 2021
The blister packaging machine is a machine that forms a blister with a transparent plastic film or sheet, and seals the product between the blister and the bottom plate by means of heat sealing, bonding, etc. The composition of the blister packaging machine: The blister packaging equipment for medicines is basically similar to the blister packaging equipment for other products, and mainly consists...
Read More
-
How Does The Tablet Press Control The Tablet Weight
Dec 28 , 2021
Increase in tablet weight difference: In the process of adding tablets, the difference in weight cannot exceed the level stipulated in the pharmacopoeia to pass, but in the process of compression, it is often found that the difference in tablet weight increases. The reasons for the treatment are as follows: (1) Uneven punch length: It is easy to cause an increase in film weight difference, so use ...
Read More
IPv6 network supported 
Home
Products